Grout Pump GP2000 Designed and Built for Mining

Grout_Pump_gp2000h side view

Grout Pump GP2000H

Grout Pump GP2000 Designed and Built for the Mining and Tunnelling Industries

Specifically designed to meet the exacting requirements of the mining and tunnelling industries, The GP2000 grout pump  range of rotor/stator pumps provide the ideal solution for all of your cementitious grout mixing and  grout  pumping needs.

Suitable for use in most grouting applications, the gp2000 grout  pump can be used for all types of cementitious  grouts. From specially formulated high-flow grouts through to low water-cement ratio thrixotropic grouts. The GP2000 is also suitable for use in small volume wet shotcrete applications up to a maximum aggregate size of 4mm.

Designed with a focus on robust performance and easy operation the GP2000 grout pump delivers outstanding results in terms of both quality and productivity.  It’s fully integrated compact design enables continuous grouting with a high degree of quality control while the units high-efficiency 100 litre capacity paddle mixer allows  for simultaneous mixing and pumping.

Features:

  • Robust and compact design
  • Easily operated by one person
  • Inbuilt water meter
  • Low work height
  • Easy clean up
  • Low maintenance
  • Easily manoeuvrable by crane or forklift
  • Australian made

Suitable for use with:

  • Low water-cement ratio grouts
  • Thrixotropic grouts
  • High flow grouts
  • Sand/Cement grouts
  • Wet shotcrete mix (to max 4mm aggregate size)

 Drive systems available:

  •  GP2000A (Air powered grout pump)
  • GP2000H (Hydraulic powered grout pump)
  • GP2000E (Electric powered grout pump)
  • GP2000D (Diesel over Hydraulic powered grout pump)
Output: 2,000 litres per hour
Mixing Capacity: 100 litres
Hopper Capacity: 195 litres
Conveying Distances: Vertical:       20-30m
Horozontal:  40-50M
Maximum Pumping Pressure (grout)*: 25 bar
*at pump outlet-grout line pressures will be dependant on
the grout type, viscosity and grout line diameter and lengths.
Posted in Grout Pumps | Comments Off on Grout Pump GP2000 Designed and Built for Mining

CONCRETE MIXER BOWL GEARBOXES AND MOTORS

PMB Industries planetary Mixer Bowl Gearboxes for Concrete Trucks:

PMB Mixer photo1Concrete Mixer bowl gearbox leading manufacturer PMP are now available at Moore-Quip.  PMP’s mission was to design and develop and manufacture the most efficient, reliable and quiet mixer bowl gearboxes for each specific truck application. PMP has been supplying its PMB mixer bowl gearboxes to leading concrete suppliers in Europe since its foundation in 1991. PMP is an acknowledged as a world leader in the manufacture and production of Mixer bowl gearboxes for concrete mixer/agitator trucks. The  PMB mixer bowl gearboxes constantly exceed customers’ expectation for reliability,durability, efficiency and serviceability, this is achieved by the selection of the best materials and the attention to detail.

PMB mixer bowl gearboxes offer the widest range of applications on Mixer Trucks agitators  and Trailers mixers: up to 16 cubic meters drum capacity. PMP is also  supply of complete transmission systems, including mixer bowl gearboxes, hydraulic motor and hydraulic pumps, water pump and other mixer truck ancillary equipment. PMP introduced the Reverso series of gearboxes as a smart alternative to right angle drives. The Reverso mixer bowl gearboxes combine extremely compact dimensions, excellent design and durability, simplicity and efficiency, as these models have not adopted any bevel gear stage design.

PMB Mixer photo2

Posted in Aftermarket, Mixer Gear Box, Transmixers | Comments Off on CONCRETE MIXER BOWL GEARBOXES AND MOTORS

SKID MOUNTED OFFSHORE PUMPS

Skid Mounted Concrete & Grout Pumps

Pumping  Rate Capabilities from 20 cubes to 150 cubes per hour

The performance and reliability of our skid mounted Concrete & Grout Pumps make them ideal for offshore, high-pressure grout/concrete pumping solution. Our state-of-the-art, Concrete & Grout Pumps are designed with full consultation with the customer to ensure our product meets your needs as we specialize in bespoke concrete pumping units, we understand that one size does not fit every application.

Moore-Quip  is capable of supplying grout pumping  units in either diesel or 3 phase high voltage power hydraulic pumps.  Our  concrete pumps are capable of delivering from 10 cubes to 150 cubes per hour (various models) with a high pressure setting for the larger units. As we manufacture the grout pumps to your specifications we are able to supply either left or right mounted dash panel or PLC control.

We are also capable of supplying full pump monitoring for amount of concrete/grout pumped, flow rate and outlet pressure monitoring with alarms visual and audible.

All our Concrete and Group pumps are fitted with the following:

  • Emergency stops and isolation’s
  • Fully insulated and shielded wiring.
  • Work lights
  • Dual hydraulic circuit with automatic change over.
  • Fully automatic stroke adjustment
  • Variable discharge rates with variable displacement pumps
  • Safety interlocks
  • Self adjusting wear ring
  • Full hydraulic filtration

S20 Skid mounted

Posted in Civil, OffShore | Comments Off on SKID MOUNTED OFFSHORE PUMPS

Liquid Hammer Foamers

Liquid Hammer Foamers and Sprayers, you end up cleaning your machine – not the ground!

 

FAT BOY Sprayer Liquid Hammer dispenser 25L

Specifications:

  • Air Powered Unit.Foamer Sprayer 25lt
  • Heavy Duty Stainless Steel Trolley with large inflatable tyres.
  • 25L Steel Tank.
  • Quick connect fittings.
  • 6M HD rubber hose.
  • 450mm Spray Lance (Gun) with trigger.
  • Tip assemblies to suit your product.
  • Medium Duty Cycle.
  • Inline Filter

 

 

Liquid Hammer Foamer

This is the best way to get LIQUID HAMMER onto your machinery and tools. The unit converts mains water and air (only 10-15 PSI) required and draws in Liquid Hammer concentrate to foam it up and onto your machines. By using the Liquid hammer foamer you end up cleaning your machine – not the ground!

 

 

Liquid Hammer 80 Lt Foam Cart

The new Liquid Hammer Foamer 80lt Cart offers innovative new features and ergonomics for cleaning of your machinery.

Dosing is simple !

For everyday cleaning add 1 x 20L drum of Liquid
Hammer concentrate and fill the tank with water to
give you a 3:1 ratio.

      • 9.0 M of hose
  • Ergonomic design featuring 4 wheels
  •  Drain feature allows for easy emptying
        • 80 Lt. Capacity
        • 200 mm fill cap makes filling easy
        • Requires compressed air source
Posted in Chemicals | Comments Off on Liquid Hammer Foamers

Concrete Pump Primer

Pump Priming

Concrete Pump Primer

Pump Primer

  • Powdered  pumping aid packaged in a patented, ready-to-use bag. Pump Primer is uniquely formulated to provide the concrete pumper with a cost-effective replacement for premium priced grout, primer slurries or bagged cement primers. Additionally, Pump Primer functions as a concrete pumping aid by reducing line pressure, which enables the placement of hard to pump mixes and increasing the range of pumpability. Pump Primer is also environmentally safe and compatible with all conventional concrete materials. Pump Primer contains no bentonite, cementitious materials, soaps or air entraining agents. One bag is sufficient to lubricate 30m of concrete hose or pipe work.

USE

Pump Primer is the patented polymer-based concrete pump primer. Used worldwide, it is now the standard for priming concrete pumps. This product eliminates problems associated with the use of bentonite or similar materials for pump priming. It reduces wear on equipment when starting a job.

ADVANTAGES

  • The original patented pump primer.
  • No need for expensive ready-mixed priming grout.
  • Eliminates the need for carrying bagged cement.
  • Packaged in easy to handle 8 ounce bags.
  • Increases ease and range of pumpability.
  • Decreases wear on equipment.
  • Easily introduced into pumping equipment.
  • Decreases horsepower/Kw required for pumping.
  • Reduces friction and line pressure.

PACKAGING

250 Gram  bag, 50 bags per case.

 

Posted in Chemicals | Comments Off on Concrete Pump Primer

Barrell Kleen Supergel Concrete Splash Remover

 

 

 

Barrell Kleen Supergel

Concrete Splash Remover

Description

Barrell Kleen Supergel is a unique gel formulation based on new organic salt technology. Barrell Kleen Supergel performs like a strong acid but is non-corrosive to skin and most metals. In fact, Barrell Kleen Supergel is classified by the criteria of Worksafe Australia as non-hazardous.

Applications

Barrell Kleen Supergel replaces dangerous hydrochloric and other commercial acidic formulations with a safer alternative. Barrell Kleen Supergel is designed to efficiently remove concrete splash and cement dust residues from vehicles and all other surfaces commonly found in the pre-mix concrete industry, including pre-mix concrete agitators, level screeders and concrete pumps. Barrell Kleen Supergel only becomes active when exposed to the target residue unlike normal acids that release all of their available activity immediately.

Barrell Kleen Supergel is best used neat. The normal method of application is to apply the undiluted product to the target surface using a soft broom that has been soaked in Barrell Kleen Supergel. Once applied the product should be left for a few minutes to do its work prior to rinsing with water. It is best not to allow the surface to dry prior to rinsing.

The OH&S concerns associated with the use of dangerous acidic formulations can be eliminated with the use of Barrell Kleen Supergel.

User Benefits

  • Fast & efficient removal of concrete and all cement based residues.
  • Replaces dangerous acids commonly used in the pre-mix concrete industry with a non-hazardous material. Barrell Kleen Supergel is non-hazardous to the criteria of Worksafe Australia.
  • Out performs all other “acid replacement” products. Has concrete dissolving power greater than 10% hydrochloric acid.
  • Very low odour level and non-fuming.
  • Barrell Kleen Safe is 6000 times less corrosive to steel and 70 times less corrosive to aluminium when compared with 10% hydrochloric acid.
  • Unique detergency properties produce a streak free finish and leave dried surfaces with a pleasing surfactant sheen.
Posted in Chemicals | Comments Off on Barrell Kleen Supergel Concrete Splash Remover

Form Oil Non Flammable, Protect your equipment paint work!


form oil for shotcrete

Form oil application

Form Oil

Non Flammable 

 

 

Form Oil Release agent is an emulsion of organic

Form oil can be applied to concrete machinery and Shotcrete machines to aid in the release of the hardened concrete and splatter from the machinery. Form Release forms a physical barrier between the painted or bare metal surface and the concrete. The soap like material used as the emulsifier reacts with the free lime on the surface of the concrete/Shotcrete.The reaction of the emulsifier forming a chemically inert calcium soap that enhances the separation of the concrete from the equipment surface. The chemically reactive components in FORM RELEASE provide a water repellent interface, which protects your equipments paint work from build-up and splatter.

APPLICATION

Brush or conventional form oil sprayer can be used to apply FORM RELEASE.  If a oil sprayer is used, care should be taken to ensure that a fine nozzle is fitted, as FORM RELEASE should be applied in a light continuous film.

HEALTH & SAFETY

FORM   RELEASE is  a  non-toxic form oil  and classed as non-hazardous under Work Safe Guidelines.

FORM RELEASE is available in 20 Lt,
200 Lt 1000 Lt

 

Posted in Chemicals | Comments Off on Form Oil Non Flammable, Protect your equipment paint work!

Concrete Pumping Hoses

 Quality Concrete Pumping Hose

ContinentalContinental Allcrete Textile Reinforced Concrete, Plaster, & Grouting Hose

Continental Allcrete concrete pumping hose is meant to last and has proven itself as an industry leader – offering greater durability and lower overall replacement costs. It is used to conduct wet concrete, plaster, grout, wet shotcrete, and concrete to building structures, dams, tunnel faces, swimming pools, or construction sites. It can also be used for material handling on drilling rigs. This is a rugged, durable, high performance concrete hose that is to be coupled with high-quality, abrasion resistant permanent swage fittings. Perfect for drop hoses due to its high working pressure and flexabilty. Manufactured in Canada.

Safe working Pressure: 85 Bar

Surviver hose

Continental Surviver Wire  Reinforced Concrete, Plaster, & Grouting Hose

The Survivor Hose Compound is one of the toughest compounds used on Continental Engineered Products conveyor belts. It is now available inside a family of Continental Engineered Products concrete handling hose as a tube compound, and is able to withstand serious abuse and increase the life of your hose.

The Continental has a steel wire reinforcement designed to handle wet concrete with high head pressures at the critical flex areas on boom trucks, shotcrete equipment, line pumps, grout hoses and any concrete pumping equipment with a  piston pump that It is also used as a discharge hose on the delivery end of high pressure pumps.Manufactured in Canada.

Safe working Pressure: 85 Bar

 

 

Alfagomma2

 

 

 

Alfogomma Textile Reinforced Concrete, Plaster, & Grouting Hose

Textile concrete pumping hose fabric construction. Designed for pumping plaster, grout, and wet cement to placement sites.Manufactured in Italy.

Safe Woking Pressure 40Bar

 

Alfagomma Wire  Reinforced Concrete, Plaster, & Grouting Hose

Steel-reinforced concrete pumping hose — Special easy handling construction for concrete placement at placement site. Manufactured in Italy.

Safe working Pressure: 85 Bar

 

W Win Concrete hose

 

 

 

Textile Reinforced Concrete, Plaster, & Grouting Hose

Textile concrete pumping hose fabric construction.

High pressure concrete delivery hose suitable construction. High strength nylon 66 cord spiral, good flexible and shock resistance. Designed for pumping concrete, plaster, grout, and wet cement to placement sites. Manufactured in China.

Safe Woking Pressure 55Bar

 

Steel Reinforced Concrete, Plaster, & Grouting Hose

Steel-reinforced concrete pumping hose — Special easy handling construction for concrete placement at placement site.Manufactured in China.

Safe working Pressure: 85 Bar

 

 

 

Posted in Hoses | Comments Off on Concrete Pumping Hoses

Shotcrete Nozzle Parts

 

shotcrete parts

Shotcrete nozzle parts

Shotcrete Nozzle Parts and Accessories

Jacon polimer Nozzle

Jacon Nozzle

 

We have the largest range of Shotcrete Nozzles and accessories in Australia. Our Shotcrete nozzle are used for both hand-held and robotic shotcreting in mines and civil construction. We cater from the pool  shotcrete nozzle to the  mining Jacon 2″and 2 1/2″ systems.  All our Shotcrete Nozzles are Australian made from quality polymers.

Moore-Quip have specially designed Nozzle tips in various (DURO) hardness ratings.  Our in-house designed ,spray gun, which is 30% lighter than the  standard spray gun. With its lightweight aluminium body, making it ideal for civil work and allowing for less worker fatigue and longer spraying time.

Our after-market Nozzle assemblies are also available for  Jacon and Normet equipment. Nozzles create  a “venturi” action, as swirling air surrounds the concrete as it travels through the nozzle. This prevents the concrete from segregating and provides a better surface finish and compaction.

Posted in Shotcrete | Comments Off on Shotcrete Nozzle Parts

Tooling, Ultrasonic Thickness Tester

Ultrasonic Thickness Tester 

Ultrasonic tester

Ultrasonic thickness tester unit is suitable for measuring, boom pipes, bends, reducers and any steel or hardened steel pipe, tube and or plate.

Moore-Quip is a leading supplier of Ultrasonic Thickness tester Gauges. Ultrasonic Thickness tester Gauges are used in inspection and quality control situations to detect the wall thickness of various materials. They may be utilised to determine the extent of damage such as pitting and internal corrosion.

This unit is not suitable for cast iron due to its big crystalloid composition or twin wall pipes.

Ultrasonic Thickness Tester is ideal for checking pipe,bend and reducer wall thickness testing

Suitable for Petrochemical, Pipeline, Fabrication, Aerospace, Shipping, Automotive and other manufacturing industries.

Features:

  • Auto power off.
  • Back light function.
  • Thickness alarm setup.
  • Low battery indication.
  • Coupling status indication.
  • Auto calibration to assure the accuracy.
  • 12 sound velocities for different material.
  • 12 thickness measurement data store and recall.
Specifications:
Measuring range 1.00-300.00mm(steel)
Accuracy +/-(1%H+0.1mm)
Resolution 0.01mm(1.00 to 99.99mm)
0.1mm(100 to 300mm)
Minimum limit for tube measuring(steel) Diameter15*2.0mm(6mm transducer)
Diameter20*3.0mm(10mm transducer)
Sound velocity 1000 to 9999m/s
Thickness<==20mm, accuracy of velocity +/-1mm/H*100%
Thickness>==20mm, accuracy of velocity +/-5%
Operation environment Operation Tem: 0-40C degree
Temp of workpiece: <60°C
Relative humidity <90%
Note Do not apply in violent vibration/erosive material
Avoid impact and humidity
Power supply 1.5V AAA Batteries
Operation current <=35mA(with back light on)

Box Contains:

  • 5MHz/10mm probe
  • 5MHz/6mm probe.
  • Standard sample block: 4mm
  • Carrying case.
  • Untrasonic Gell
  • Manual

 

Posted in Tooling | Comments Off on Tooling, Ultrasonic Thickness Tester